メインコンテンツにスキップ
英語
日本語

手順 2を翻訳中

手順2
Using tweezers or your finger nails, pull up the brown flaps where the three orange film strips meet the circuit board. Use the tweezers to pull all three orange film strips out of each port. The strips should come out easily. Use the tweezers to pull all three orange film strips out of each port. The strips should come out easily.
  • Using tweezers or your finger nails, pull up the brown flaps where the three orange film strips meet the circuit board.

  • Use the tweezers to pull all three orange film strips out of each port. The strips should come out easily.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります