メインコンテンツにスキップ
英語
日本語

手順 2を翻訳中

手順2
This is a picture of the button in place with the connector to the logic board removed.
  • This is a picture of the button in place with the connector to the logic board removed.

  • There are three plastic pins protruding up from the main back case that the button fits over. They appear to be slightly melted and mashed to hold it in place. I used a pocket knife to pry it up and off the posts.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります