手順 14を翻訳中
手順14

-
Remove the top layer of sticky black tape, then prep the LCD assembly and new touchscreen/digitizer with new adhesive--I just used thin strips of two-sided tape.
-
Using a microfiber cloth remove any dust from the LCD display.
-
Slide the new touchscreen/digitizer cable between the frame and LCD display.
-
Once the cable is through go ahead and remove all paper from adhesives and set the screen in place.
-
Now you can begin reconstructing your phone. Go ahead and go through the steps backwards.
-
Reattaching the cables is the trickiest part but not impossible.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。