メインコンテンツにスキップ
英語
フランス語

手順 10を翻訳中

手順10
Before lifting up the motherboard, be sure to release the 2nd jawbone connector.  This one is for the touchscreen/digitizer. (Photo is with motherboard already out to show you exactly where it is. With the flex cable removed you can now lift up on the motherboard.  There is still a cable attached, but it is the touchscreen/digitizer cable.  So, if you have a broken screen it IS ok if you break this cable.
  • Before lifting up the motherboard, be sure to release the 2nd jawbone connector. This one is for the touchscreen/digitizer. (Photo is with motherboard already out to show you exactly where it is.

  • With the flex cable removed you can now lift up on the motherboard. There is still a cable attached, but it is the touchscreen/digitizer cable. So, if you have a broken screen it IS ok if you break this cable.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります