メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての8個のガイドに反映されます。

英語
イタリア語

手順 3を翻訳中

手順3
Using your fingers, carefully pull the vertical sync cable out of its socket on the LED driver board near the top left corner of your iMac. Be sure to pull the connector parallel to the LED driver board, straight out of its socket.
  • Using your fingers, carefully pull the vertical sync cable out of its socket on the LED driver board near the top left corner of your iMac.

  • Be sure to pull the connector parallel to the LED driver board, straight out of its socket.

Con le dita, estrarre il cavo della sincronizzazione verticale dal connettore femmina sulla scheda di azionamento LED, vicino all'angolo superiore sinistro dell'iMac.

Estrarre il connettore in parallelo rispetto la scheda di azionamento LED, direttamente fuori dal connettore femmina.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります