メインコンテンツにスキップ
英語
日本語

手順 2を翻訳中

手順2
Insert the flat side of a nylon spudger below the digitizer ribbon cable to free it from the adhesive. You may use your fingers to pull the ribbon cable gently as you free the panel from the adhesive with the spudger. It may be necessary to apply more heat if the adhesive is still too strong.
  • Insert the flat side of a nylon spudger below the digitizer ribbon cable to free it from the adhesive.

  • You may use your fingers to pull the ribbon cable gently as you free the panel from the adhesive with the spudger. It may be necessary to apply more heat if the adhesive is still too strong.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります