ご注意:あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。
手順 2を翻訳中
手順2

Remove screw covers
-
Using a spudger, work off the cap of the first screw. The cap is tight; you may need a jimmy or metal spudger.
-
Using the flat end of a spudger, remove the airbag emblem. The emblem has clips on the top and bottom -- work carefully.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。