メインコンテンツにスキップ

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 3を翻訳中

手順3
Slide a spudger under the front-facing camera to separate it form the adhesive securing it to the rear case. There is conductive tape between the front camera ribbon cable and the headphone jack cable underneath. When replacing your front camera, apply pressure on the gold contacts to readhere these cables. Remove the front-facing camera from the iPad.
  • Slide a spudger under the front-facing camera to separate it form the adhesive securing it to the rear case.

  • There is conductive tape between the front camera ribbon cable and the headphone jack cable underneath. When replacing your front camera, apply pressure on the gold contacts to readhere these cables.

  • Remove the front-facing camera from the iPad.

正面カメラの底にスパッジャーを差し込み、背面ケースに留められたフォーム製の接着剤を剥がしていきます。

iPadから正面カメラを取り出します。

[* black] Slide a spudger under the front-facing camera to separate it form the adhesive securing it to the rear case.
[* icon_note] There is conductive tape between the front camera ribbon cable and the headphone jack cable underneath. When replacing your front camera, apply pressure on the gold contacts to readhere these cables.
[* black] Remove the front-facing camera from the iPad.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります