メインコンテンツにスキップ

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 2を翻訳中

手順2
Use a spudger to pry the front-facing camera housing up and lift it out of the case. Depending on how you performed the digitizer removal, this component may be adhered to the inner side of the front panel. Depending on how you performed the digitizer removal, this component may be adhered to the inner side of the front panel.
  • Use a spudger to pry the front-facing camera housing up and lift it out of the case.

  • Depending on how you performed the digitizer removal, this component may be adhered to the inner side of the front panel.

正面カメラの内蔵ケースをこじ開けて、ケースより引き上げます。

[* black] PryUse a spudger to pry the front-facing camera housing up and lift it out of the case.
[* icon_note] Depending on how you performed the digitizer removal, this component may be adhered to the inner side of the front panel.
[* black] PryUse a spudger to pry the front-facing camera housing up and lift it out of the case.
[* icon_note] Depending on how you performed the digitizer removal, this component may be adhered to the inner side of the front panel.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります