メインコンテンツにスキップ
英語
日本語

手順 2を翻訳中

手順2
Disconnect both fans by pulling their connectors straight up off the logic board. The connector for the left fan requires a considerable amount of force to remove. If you bend the pins on the logic board, use the fan connector as a guide to bend them straight.
  • Disconnect both fans by pulling their connectors straight up off the logic board.

  • The connector for the left fan requires a considerable amount of force to remove. If you bend the pins on the logic board, use the fan connector as a guide to bend them straight.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります