メインコンテンツにスキップ
英語
日本語

手順 4を翻訳中

手順4
you will need to slowly cut through the foam to separate the wires from the battery.  then use a soldering iron to desolder the old battery from the board  these connections go through the entire board.
  • you will need to slowly cut through the foam to separate the wires from the battery. then use a soldering iron to desolder the old battery from the board these connections go through the entire board.

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります