メインコンテンツにスキップ

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
英語

手順 3を翻訳中

手順3
To separate the cover, carefully lift it up and away from the hinges (in order to clear the headphone port), then pivot it towards the hinges to expose the circuit boards. Don't fully remove the cover yet, or you may damage the delicate ribbon cable that still connects it to the motherboard. Don't fully remove the cover yet, or you may damage the delicate ribbon cable that still connects it to the motherboard.
  • To separate the cover, carefully lift it up and away from the hinges (in order to clear the headphone port), then pivot it towards the hinges to expose the circuit boards.

  • Don't fully remove the cover yet, or you may damage the delicate ribbon cable that still connects it to the motherboard.

To separate the cover, carefully lift it up and away from the hinges (in order to clear the headphone port), then pivot it towards the hinges to expose the circuit boards.

Don't fully remove the cover yet, or you may damage the delicate ribbon cable that still connects it to the motherboard.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります