メインコンテンツにスキップ

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 3を翻訳中

手順3
Gently pull out both of the adhesive tabs out of the phone, parallel to the rear cover. If the adhesive tabs break, try to use a thin flat plastic tool such as a plastic card to remove the last of the adhesive. If the adhesive is stubborn, heat it with an iOpener or hair dryer and pry again.
  • Gently pull out both of the adhesive tabs out of the phone, parallel to the rear cover.

  • If the adhesive tabs break, try to use a thin flat plastic tool such as a plastic card to remove the last of the adhesive. If the adhesive is stubborn, heat it with an iOpener or hair dryer and pry again.

静かに両方の黒いストラップを接着剤タブで引き出します。

ストラップを上向きに引っ張らないでください! 間の接着剤のタブが簡単に破裂してしまいます。この場合は、プラスチック製のカードを使用して慎重にバックパネルをはがし、必要に応じてヒートガンで温めて下さい。

[* black] Gently pull out both of the black straps with the adhesive tabs.
[* icon_caution] Never pull
adhesive tabs out of the straps upwards but always sideways. It can easily happen that you rupturephone, parallel to the rear cover.
[* icon_note] If
the adhesive tabs right in between. In this casebreak, try to use a thin flat plastic tool such as a plastic card to pry offremove the back cover carefully, uselast of the adhesive. If the adhesive is stubborn, heat if necessary !it with an iOpener or hair dryer and pry again.
[* black] Gently pull out both of the black straps with the adhesive tabs.
[* icon_caution] Never pull
adhesive tabs out of the straps upwards but always sideways. It can easily happen that you rupturephone, parallel to the rear cover.
[* icon_note] If
the adhesive tabs right in between. In this casebreak, try to use a thin flat plastic tool such as a plastic card to pry offremove the back cover carefully, uselast of the adhesive. If the adhesive is stubborn, heat if necessary !it with an iOpener or hair dryer and pry again.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります