メインコンテンツにスキップ
英語
日本語

手順 3を翻訳中

手順3
To the bottom right is a screw that connects a ground strap and holds the board to the chassis, undo that. With all the connector disconnected, the ground strap removed, pull the DM board carefully from the chassis. Some models have a small tab stop that you must push down to release the board. With all the connector disconnected, the ground strap removed, pull the DM board carefully from the chassis. Some models have a small tab stop that you must push down to release the board.
  • To the bottom right is a screw that connects a ground strap and holds the board to the chassis, undo that.

  • With all the connector disconnected, the ground strap removed, pull the DM board carefully from the chassis. Some models have a small tab stop that you must push down to release the board.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります