メインコンテンツにスキップ
英語
日本語

手順 3を翻訳中

手順3
Unscrew the battery by using a J1 screw driver head, and place the four .7mm screws off to the side Using a pry tool, pop the battery connector out of place and gently lift the battery upward. Using a pry tool, pop the battery connector out of place and gently lift the battery upward.
  • Unscrew the battery by using a J1 screw driver head, and place the four .7mm screws off to the side

  • Using a pry tool, pop the battery connector out of place and gently lift the battery upward.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります