メインコンテンツにスキップ
英語
日本語

手順 10を翻訳中

手順10
The middle part of my power connector had sheared away from its solder points on the motherboard.
  • The middle part of my power connector had sheared away from its solder points on the motherboard.

  • I had to use a bit of flux, but I managed to re-tin all three contact point on the motherboard, as well as the pins in the connector.

  • I re-soldered the whole thing and used my trusty hot glue gun to encase the whole connector to prevent it from happening again anytime soon.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります