メインコンテンツにスキップ
英語
日本語

手順 5を翻訳中

手順5
Insert an opening pick approximately 1/16 of an inch and slide it along the side to sparate the display from the frame. You might feel more resistance where the LCD ends on the lower end. Stop here and take your time to reheat that part and soften the glue.
  • Insert an opening pick approximately 1/16 of an inch and slide it along the side to sparate the display from the frame.

  • You might feel more resistance where the LCD ends on the lower end.

  • Stop here and take your time to reheat that part and soften the glue.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります