メインコンテンツにスキップ
英語
日本語

手順 2を翻訳中

手順2
There are three small 4.5mm springs that can be easily lost. Be careful when lifting up the railing assembly to make sure you don't lose them. The location of the springs are circled. Using two plastic tool removers, lift the two rails up at an angle. Keep the rods angled as shown.
  • There are three small 4.5mm springs that can be easily lost. Be careful when lifting up the railing assembly to make sure you don't lose them.

  • The location of the springs are circled.

  • Using two plastic tool removers, lift the two rails up at an angle. Keep the rods angled as shown.

  • The rail at the top of the picture is 82mm and the rail at the bottom of the picture is 65mm.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります