メインコンテンツにスキップ
英語
イタリア語

手順 9を翻訳中

手順9
With I/O board free, we can focus on the fan. This Delta electronics fan is held in place by three screws with rubber vibration damping mounts, and is rated for 5 V and 0.33 A. A fan can be a death sentence for battery life in any portable device, so it makes sense that rumors have it that the graphics are drastically underclocked when you're undocked.
  • With I/O board free, we can focus on the fan.

  • This Delta electronics fan is held in place by three screws with rubber vibration damping mounts, and is rated for 5 V and 0.33 A.

  • A fan can be a death sentence for battery life in any portable device, so it makes sense that rumors have it that the graphics are drastically underclocked when you're undocked.

  • In addition to saving power by pushing fewer pixels, this ought to also let the Switch save juice by running the fan quite a bit less.

Con la scheda I/O libera, possiamo concentrarci sulla ventola.

Questa ventola Delta Electronics è tenuta in posizione da tre viti con piedini antivibrazione in gomma ed è da 5 V e 0,33 A.

La presenza di una ventola equivale a una sentenza di morte per l'autonomia della batteria in ogni dispositivo portatile; perciò hanno senso le voci sulla grafica ritenuta drasticamente undercloccata in assenza di collegamento al dock.

Oltre a risparmiare energia indirizzando meno pixel, questa soluzione dovrebbe anche permettere allo Switch di usare meno la ventola a ulteriore beneficio dei consumi.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります