メインコンテンツにスキップ
英語
日本語

手順 5を翻訳中

手順5
Step 5 is about removing the cover which protects the processor from any outside damage The cover is attached to four pins. In order to remove the cover, it has to be pulled towards the left. CAUTION: There may be a plastic (rubber) pin (see Image 2), which was put in place for guarantee purposes, therefore before sliding the panel, you should locate and remove this pin
  • Step 5 is about removing the cover which protects the processor from any outside damage

  • The cover is attached to four pins. In order to remove the cover, it has to be pulled towards the left.

  • CAUTION: There may be a plastic (rubber) pin (see Image 2), which was put in place for guarantee purposes, therefore before sliding the panel, you should locate and remove this pin

  • It can also be pushed from the inside (by lifting the bottom of the cover first) (see image 3)

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります