メインコンテンツにスキップ
英語
日本語

手順 8を翻訳中

手順8
By this point enough screws should've come out and you can pry the front case away and take care with the ribbon again. Flip up to the top and unscrew the board connected to the power button. Should be just one screw. Flip up to the top and unscrew the board connected to the power button. Should be just one screw.
Rear Case
  • By this point enough screws should've come out and you can pry the front case away and take care with the ribbon again.

  • Flip up to the top and unscrew the board connected to the power button. Should be just one screw.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります