Skip to main content
英語
日本語

手順 7を翻訳中

手順7
Before removing the board, be very careful because the board is glued to the rear chassis.  Use a spluger at the points indicated by the arrow to loosen the adhesive connecting the board to the chassis. Once the board is free of the chassis, then carefully remove the tape as pointed to by the arrow.  There will be a connector to be removed from the board with a spluger.
  • Before removing the board, be very careful because the board is glued to the rear chassis. Use a spluger at the points indicated by the arrow to loosen the adhesive connecting the board to the chassis.

  • Once the board is free of the chassis, then carefully remove the tape as pointed to by the arrow. There will be a connector to be removed from the board with a spluger.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります