メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

英語
日本語

手順 16を翻訳中

手順16
Separate the Digital Display and Logic Boards from the Casing: With the digital display and top logic board loose, place the casing face down with the main logic board facing up. Release the two tabs holding the main logic board on the back casing. These tabs are located on the upper right and lower left corners of the casing.
  • Separate the Digital Display and Logic Boards from the Casing:

  • With the digital display and top logic board loose, place the casing face down with the main logic board facing up.

  • Release the two tabs holding the main logic board on the back casing. These tabs are located on the upper right and lower left corners of the casing.

  • Gently remove the main logic board from the casing.

  • Be Careful! The battery leads may get caught on the casing. You will need to help feed them through the circular hole on the casing.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります