手順番号2–iPod Nano 3rd Generation Rear Panel Replacementを翻訳

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての4個のガイドに反映されます。

英語

日本語

手順 2を翻訳中

手順2

The rear panel is secured to the front case by eight clips permanently attached to the rear panel. These clips lock onto small tabs machined into the front case.
To free the tabs, they must be pushed toward the center of the Nano. Note the location of all tabs on the rear panel. When using an iPod opening tool to free the rear panel, be sure to work the tool at the location of these clips.
To aid in visualization, the two clips boxed in red are located closest to the headphone jack.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。