メインコンテンツにスキップ
英語
日本語

手順 1を翻訳中

手順1
After you've removed the back cover, you will see a copper colored ribbon connected to a grey hinge. Carefully remove the hinge from the cord using a spudger and the ribbon will come out.
  • After you've removed the back cover, you will see a copper colored ribbon connected to a grey hinge.

  • Carefully remove the hinge from the cord using a spudger and the ribbon will come out.

  • The regular black nylon spudger should be used whenever possible, especially around sensitive internal components.

  • Make sure to wear an anti-static wrist strap when handling the motherboard.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります