メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての3個のガイドに反映されます。

英語
日本語

手順 3を翻訳中

手順3
Take off the front cover by removing  the four screws located in a square formation on the surface of the device. Use the J00 Philips driver listed in the device page. Take off the front cover by removing  the four screws located in a square formation on the surface of the device. Use the J00 Philips driver listed in the device page.
  • Take off the front cover by removing the four screws located in a square formation on the surface of the device. Use the J00 Philips driver listed in the device page.

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります