メインコンテンツにスキップ

ご注意:あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。

英語
日本語

手順 2を翻訳中

手順2
There are four Phillips head screws (2.5mm) that need to be removed: Two on the charging port, which is the small metallic piece at the bottom of the device. There is one screw that is covered by a small green tape. The tape must be peeled  off before the screw under can be removed.
  • There are four Phillips head screws (2.5mm) that need to be removed:

  • Two on the charging port, which is the small metallic piece at the bottom of the device.

  • There is one screw that is covered by a small green tape. The tape must be peeled off before the screw under can be removed.

  • The last screw is found on a speaker at the bottom right of the device. Once the screw is removed, the speaker must be removed as well.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります