メインコンテンツにスキップ
英語
日本語

手順 4を翻訳中

手順4
Make sure to have your magnetic board to hold your screws! Remove the two 3.51mm screws that are located on the top corners of the device with the same phillips screwdriver.. Next, unplug the ZIF connector and slide it out with the pointed side of the spudger.
  • Make sure to have your magnetic board to hold your screws!

  • Remove the two 3.51mm screws that are located on the top corners of the device with the same phillips screwdriver..

  • Next, unplug the ZIF connector and slide it out with the pointed side of the spudger.

  • To unclip the connector, go under the black tap and simply lift with your finger nail or spudger.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります