メインコンテンツにスキップ
英語
日本語

手順 3を翻訳中

手順3
Be sure to have a magnetic mat or anything magnetic to hold your screws! Remove two 3.51mm screws located on the bottom corners of the device with your Phillips #00 Screwdriver.
  • Be sure to have a magnetic mat or anything magnetic to hold your screws!

  • Remove two 3.51mm screws located on the bottom corners of the device with your Phillips #00 Screwdriver.

  • Carefully lift the casing and pull back the tape along with the soldered wire.

  • You can remove the soldered wire if you want or leave it connected. Refer to iFixit's guide on how to Solder はんだ付けとはんだ除去の作業ガイド

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります