メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての3個のガイドに反映されます。

英語
日本語

手順 4を翻訳中

手順4
Using a Phillips head screwdriver, remove the 9mm screw located to the right of the battery, which is connected to  the inner plastic frame. Using the plastic opening tool carefully take out the grey cylindrical piece (vibrator) that is also attached to a wire. Using the plastic opening tool carefully take out the grey cylindrical piece (vibrator) that is also attached to a wire.
  • Using a Phillips head screwdriver, remove the 9mm screw located to the right of the battery, which is connected to the inner plastic frame.

  • Using the plastic opening tool carefully take out the grey cylindrical piece (vibrator) that is also attached to a wire.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります