修理を始めるには

修理する権利

ストア

ガイドに戻る
英語
日本語
前の手順 次の手順

手順 6を翻訳中

手順6
Insert the plastic opening tool between the frame and the rear case behind the first clip. Rock the tool sideways, to spread the gap behind the clip and separate it from the rear case.

  • Insert the plastic opening tool between the frame and the rear case behind the first clip.

  • Rock the tool sideways, to spread the gap behind the clip and separate it from the rear case.

  • Initially this may not free the clip , but by repeating the procedure for each clip, it will begin to loosen the piece.

  • Repeat the procedure with the next two clips on that side

  • You may have to go back and forth between the clips to free all of them. Be patient, as the plastic frame is quite fragile.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。