メインコンテンツにスキップ
英語
日本語

手順 4を翻訳中

手順4
Remove the two 5mm Phillips head screws on the back plate labeled "HDD." Remove the back plate to the hard drive by pulling downward and lifting away. Pull laterally to the left on the black tab until it releases its connection and is able to be lifted free.
  • Remove the two 5mm Phillips head screws on the back plate labeled "HDD."

  • Remove the back plate to the hard drive by pulling downward and lifting away.

  • Pull laterally to the left on the black tab until it releases its connection and is able to be lifted free.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります