メインコンテンツにスキップ
英語
日本語

手順 1を翻訳中

手順1
Orientate the back plate so that the fan is facing away from you. Use the #0 Phillips Screw Drive to push the rubber shock mounts through the back plate.
  • Orientate the back plate so that the fan is facing away from you.

  • Use the #0 Phillips Screw Drive to push the rubber shock mounts through the back plate.

  • Make sure that the head of the screw driver is centered on the head of the rubber shock mount so that it doesn't slip off causing possible injury.

  • When attaching the new fan, push the new rubber shock mounts through the back plate first. Attach the fan once all mounts are inserted.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります