手順 12を翻訳中
手順12

-
Solder the pins to the board on the printed side of the PCB.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。
Solder the pins to the board on the printed side of the PCB.
Unsure of how to properly through-hole solder? Check out our technique guide. You can even use a thin piece of wire and practice with a hole on an unused trace.
Try to solder quickly and efficiently. Prolonged application of heat to any of the component pins can transfer enough heat to damage it.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。
次の行
前の行
下に新しい行を挿入
上に新しい行を挿入
現在の行をインデントする
現在の行をインデント解除する
現在の行を削除する
次の手順に移動します。
前の手順に移動します。
ヘルプを開く