メインコンテンツにスキップ
英語
日本語

手順 5を翻訳中

手順5
Once the tabs have been properly located, insert one tool on each side to loosen compress the base and apply downward pressure on the outer handle. For this the top end of the handle needs to rest against a solid base. It does require a considerable amount of downward force to accomplish this. With the tabs loosened and the handle opushed downward, the inner workings of the toothbrush will loosen and pop out of the handle. Remove the mechanics out of the handle.
  • Once the tabs have been properly located, insert one tool on each side to loosen compress the base and apply downward pressure on the outer handle. For this the top end of the handle needs to rest against a solid base. It does require a considerable amount of downward force to accomplish this.

  • With the tabs loosened and the handle opushed downward, the inner workings of the toothbrush will loosen and pop out of the handle.

  • Remove the mechanics out of the handle.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります