メインコンテンツにスキップ
英語
日本語

手順 2を翻訳中

手順2
Using a pair of pliers to apply some pressure round the handle. The best place to start is the wider part of the rectangular base and about 1/2" to 3/4" from the bottom Continue to apply pressures around the whole base of the the handle moving to each side of the rectangular base. It may take a few complete rotations to finally open up the gap between base and handle.
  • Using a pair of pliers to apply some pressure round the handle. The best place to start is the wider part of the rectangular base and about 1/2" to 3/4" from the bottom

  • Continue to apply pressures around the whole base of the the handle moving to each side of the rectangular base.

  • It may take a few complete rotations to finally open up the gap between base and handle.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります