メインコンテンツにスキップ
英語
日本語

手順 6を翻訳中

手順6
Carefully lift the covers off the gimbal. There is a bearing here that can fall out, be careful not to lose it. As you lift the parts be very gentle as there is a ribbon cable attaching the camera to the main circuit board. The metal plates lift out of the way and the gimbal is now in two pieces.
Separate the gimbal
  • Carefully lift the covers off the gimbal. There is a bearing here that can fall out, be careful not to lose it.

  • As you lift the parts be very gentle as there is a ribbon cable attaching the camera to the main circuit board. The metal plates lift out of the way and the gimbal is now in two pieces.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります