メインコンテンツにスキップ
英語
日本語

手順 4を翻訳中

手順4
The gimbal and camera are now free and easy to work on. Loosen this hex screw. I'm sure iFixit has a tool that will fit this perfectly. Remove the four Philips screws on the bottom plates. There are two plates here with two screws each. Be careful you don't lose the button on the bottom of the gimbal.
Remove the bottom plate screws
  • The gimbal and camera are now free and easy to work on.

  • Loosen this hex screw. I'm sure iFixit has a tool that will fit this perfectly.

  • Remove the four Philips screws on the bottom plates. There are two plates here with two screws each. Be careful you don't lose the button on the bottom of the gimbal.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります