メインコンテンツにスキップ
英語
日本語

手順 3を翻訳中

手順3
Simply lift the gimbal out of the rubber mounts and fold back towards the front end of the Phantom. Use a small tool to press the clip holding in the smallest connector. I used the same tool to work the other two connectors up out of the gimbal. I had to work them from side to side a little to free them.
Remove the gimbal from the Phantom
  • Simply lift the gimbal out of the rubber mounts and fold back towards the front end of the Phantom.

  • Use a small tool to press the clip holding in the smallest connector.

  • I used the same tool to work the other two connectors up out of the gimbal. I had to work them from side to side a little to free them.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります