メインコンテンツにスキップ
英語
日本語

手順 12を翻訳中

手順12
With the cover lid unscrewed we can push out the source of rotary motion and discover a small circular board behind the rear cover of the motor. Besides distributing power it also has three sensors (every fourth coil) for measuring the speed. 12 coils on the outer ring  make the 10 magnets on the center spindle go round and round–260 times per minute. The motor has a continuous output power of 180W and 7.3 Nm of torque.
hub gear motor
  • With the cover lid unscrewed we can push out the source of rotary motion and discover a small circular board behind the rear cover of the motor.

  • Besides distributing power it also has three sensors (every fourth coil) for measuring the speed.

  • 12 coils on the outer ring make the 10 magnets on the center spindle go round and round–260 times per minute. The motor has a continuous output power of 180W and 7.3 Nm of torque.

  • The three gears on the flip side are made of plastic to keep abrasion to a minimum.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります