メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

英語
イタリア語

手順 1を翻訳中

手順1
If your new optical drive already has brackets on it, you'll only need to transfer the data cable to your new drive. Skip the bracket removal steps below. Remove the two silver Phillips screws securing the mounting bracket to the left side of the optical drive.
  • If your new optical drive already has brackets on it, you'll only need to transfer the data cable to your new drive. Skip the bracket removal steps below.

  • Remove the two silver Phillips screws securing the mounting bracket to the left side of the optical drive.

  • Rotate the drive and disconnect the orange ribbon cable from the optical drive.

Le nuova unità ottica è già dotata di staffe, occorre solo trasferire il cavo dati.

Rimuovere le due viti con testa a croce argentate che fissano la staffa di montaggio al lato sinistro dell'unità ottica.

Ruotare l'unità e scollegare il cavo piatto arancione dall'unità ottica.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります