メインコンテンツにスキップ
英語
日本語

手順 6を翻訳中

手順6
Guide a 12 mm socket with two 10" extensions down onto the bolt. You will need to carefully work the socket and extensions between wires and hoses, being careful not to put too much tension on them. Turn the bolt counter-clockwise until it completely un-threads.
  • Guide a 12 mm socket with two 10" extensions down onto the bolt.

  • You will need to carefully work the socket and extensions between wires and hoses, being careful not to put too much tension on them.

  • Turn the bolt counter-clockwise until it completely un-threads.

  • Remove the bolt from the engine bay.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります