メインコンテンツにスキップ
英語
日本語

手順 4を翻訳中

手順4
Once the draining oil has slowed to a drip, wipe the old oil off the area around the drain hole with a clean rag or towel. Place the oil drain plug back over its hole and turn it clockwise by hand as far as possible. Finish tightening the oil drain plug with the 19 mm box end wrench until it is snug.
  • Once the draining oil has slowed to a drip, wipe the old oil off the area around the drain hole with a clean rag or towel.

  • Place the oil drain plug back over its hole and turn it clockwise by hand as far as possible.

  • Finish tightening the oil drain plug with the 19 mm box end wrench until it is snug.

  • Do not over-tighten the drain plug, you may strip the threads or crack the oil pan.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります