修理を始めるには

修理する権利

ストア

ガイドに戻る
英語
中国語
前の手順 次の手順

手順 11を翻訳中

手順11
Locate and remove the orange-ringed dipstick. Wipe down the dipstick with a rag or towel to remove oil and ensure a valid reading. Reinsert the dipstick all the way, then remove it.

  • Locate and remove the orange-ringed dipstick.

  • Wipe down the dipstick with a rag or towel to remove oil and ensure a valid reading.

  • Reinsert the dipstick all the way, then remove it.

  • Oil should cover the end of the dipstick, up to the second hole. The top hole is the maximum oil level, and the bottom is the minimum.

  • Your reading may seem a little high after adding 5 quarts of oil, but oil has not yet seeped into all the nooks and crannies. For a more accurate reading, start the car, drive it around for a bit, park on a flat surface, then retake the reading.

  • You can add or remove oil as you see fit.

找到并取出橘红色圆环的机油标尺。

使用毛巾或抹布擦干净标尺，来确保读数的准确。

重新将机油标尺插入，然后再取出。

机油应该覆盖在机油标尺的尾端到第二个孔。 最顶点的孔是最高值。 最低点的孔是最低值。

当您倒入5夸脱的机油时读数会略微高于最高值，但是机油还没流动到各个部位。为了读数更加准确，请发动汽车一会，然后停水平的地面上，再次读数。

您可以根据需要添加或排出机油。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。