メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

英語
中国語

手順 6を翻訳中

手順6
Make sure you are wearing clean gloves, then dip your finger into the new oil and evenly rub a thin layer of oil around the rubber gasket of the new oil filter. Use a clean rag or towel to wipe down the oil filter threads and contact area on the engine. Use your hand to screw the new filter back into place over the oil filter threads. Hand-tighten it until it is snug.
  • Make sure you are wearing clean gloves, then dip your finger into the new oil and evenly rub a thin layer of oil around the rubber gasket of the new oil filter.

  • Use a clean rag or towel to wipe down the oil filter threads and contact area on the engine.

  • Use your hand to screw the new filter back into place over the oil filter threads. Hand-tighten it until it is snug.

  • Remove the oil drain pan and any other tools from underneath the car.

请确保您佩戴的手套干净。 然后使用手指蘸取新机油然后将其薄薄的涂抹在新的机滤橡胶垫圈上。

使用干净的抹布或者毛巾来清理油滤与发动机接触部位。

使用手来将新的油滤上紧。

将车底下的接油盘和工具取出。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります