修理を始めるには

修理する権利

ストア

ガイドに戻る
英語
中国語
前の手順 次の手順

手順 2を翻訳中

手順2
Use a box end wrench to loosen the 17 mm hex oil drain plug located at the back of the oil pan, facing the rear of the car. Only use the wrench for about a half turn. Position an oil drain pan underneath the drain plug and loosen the drain plug by hand until it is free and oil begins to flow out of the oil pan. Watch the draining oil for shiny specks. Metal flakes in your oil could indicate a serious problem inside your engine.

  • Use a box end wrench to loosen the 17 mm hex oil drain plug located at the back of the oil pan, facing the rear of the car. Only use the wrench for about a half turn.

  • Position an oil drain pan underneath the drain plug and loosen the drain plug by hand until it is free and oil begins to flow out of the oil pan.

  • Watch the draining oil for shiny specks. Metal flakes in your oil could indicate a serious problem inside your engine.

使用套筒扳手松开油底壳背面的17mm六角排油塞。 仅用扳手转半圈就好。

将接油盘放在排油塞下方，然后用手松开排油塞，直到油自己开始自己流到接油盘之中。

检查排出的有是否有任何闪亮的斑点、 如果有，那证明发动机内部存在严重问题。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。