メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

英語
中国語

手順 1を翻訳中

手順1
Since the jacking location on the Accord isn't large enough to fit both a jack and a jack stand, you must raise the car by placing the jack on the front subframe. Place a jack on the round portion of the front subframe on the driver side of the car, just inside the wheel and just outside of the front sway bar bushing. Raise the car until you have enough room to work comfortably underneath it.
  • Since the jacking location on the Accord isn't large enough to fit both a jack and a jack stand, you must raise the car by placing the jack on the front subframe.

  • Place a jack on the round portion of the front subframe on the driver side of the car, just inside the wheel and just outside of the front sway bar bushing.

  • Raise the car until you have enough room to work comfortably underneath it.

  • Place a jack stand under the front jacking location, the reinforced metal part of the vertical crossbeam, and lower the car onto the jack stand. Remove the jack from under the car.

  • Never work under a car that is only supported by a jack. The jack may slip or fail, resulting in serious injury or death.

由于雅阁千斤顶顶起位置不够大,无法将千斤顶以及千斤顶支架同时放入,你必须将千斤顶放置在前副架上来抬起汽车。

将千斤顶放置在驾驶员侧的前车架圆形部分上(车轮内部,位于前等速万向节的轴套外侧。)

将千斤顶抬升到适合您在车底工作的高度。

将千斤顶支架放置在前千斤顶顶点。垂直横梁的加强金属部分。 将汽车降下到千斤顶支架上,取下千斤顶。

切勿在仅被千斤顶顶起的车下操作。 千斤顶可能会滑动或失效导致严重的受伤或死亡。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります