メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての25個のガイドに反映されます。

英語
イタリア語

手順 11を翻訳中

手順11
Leave the opening pick in the iPad slightly past the front-facing camera. Take a second pick and insert it to the left of the camera, where the first pick just was. Slide it back to the corner to completely cut any remaining adhesive. Leave the second pick in place to prevent the corner adhesive from re-sealing as it cools.
  • Leave the opening pick in the iPad slightly past the front-facing camera.

  • Take a second pick and insert it to the left of the camera, where the first pick just was. Slide it back to the corner to completely cut any remaining adhesive.

  • Leave the second pick in place to prevent the corner adhesive from re-sealing as it cools.

Lascia il plettro infilato nell'iPad leggermente dopo la fotocamera.

Prendi un secondo plettro ed infilalo a sinistra della fotocamera, dove sei già passato col primo plettro. Fallo scorrere verso l'angolo in alto a sinistra per tagliare del tutto l'adesivo rimasto.

Lascia il secondo plettro sotto l'angolo per evitare che l'adesivo si reincolli raffreddandosi.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります