メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての25個のガイドに反映されます。

英語
中国語

手順 10を翻訳中

手順10
Slide the opening pick along the top edge of the iPad, stopping just before you reach the camera. As you reach the front-facing camera, pull the pick out slightly and continue sliding it across the top edge. Avoid sliding the opening pick over the front-facing camera, as you may smear adhesive onto the lens or damage the camera. The following steps will detail how to best avoid disturbing the front-facing camera.
  • Slide the opening pick along the top edge of the iPad, stopping just before you reach the camera.

  • As you reach the front-facing camera, pull the pick out slightly and continue sliding it across the top edge.

  • Avoid sliding the opening pick over the front-facing camera, as you may smear adhesive onto the lens or damage the camera. The following steps will detail how to best avoid disturbing the front-facing camera.

继续沿上边缘滑动撬片 ,直到撬片到达前置摄像头位置。

触碰到前置摄像头的时候, 稍微把撬片拔出来一些再继续滑动撬片。

不要将撬片放到前置摄像头上方去, 否则可能会将胶水不小心涂抹在镜头之上甚至是损坏摄像头。下面的步骤中将会会详细的介绍如何操作。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります