メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての21個のガイドに反映されます。

英語
日本語

手順 3を翻訳中

手順3
While holding the glass up with the suction cup, slide the point of an opening pick into the gap between the glass and body of the iPad. Don't insert the opening pick any deeper than 2 mm into the side of the display. Inserting the pick deeper than 2 mm could damage the backlight assembly, LCD display, or touchscreen.
  • While holding the glass up with the suction cup, slide the point of an opening pick into the gap between the glass and body of the iPad.

  • Don't insert the opening pick any deeper than 2 mm into the side of the display. Inserting the pick deeper than 2 mm could damage the backlight assembly, LCD display, or touchscreen.

吸盤でガラスを引き上げながら、ピックの先端をガラスとiPad本体の隙間に差し込みます。

ピックをディスプレイ横にある黒い外縁よりも奥に差し込まないでください。深くまで差し込み過ぎると、液晶ディスプレイを傷つけてしまうことがあります。

[* black] While holding the glass up with the suction cup, slide the point of an opening pick into the gap between the glass and body of the iPad.
[* icon_caution] Don't insert the opening pick any deeper than the black bezel on2 mm into the side of the display. Inserting the pick too far maydeeper than 2 mm could damage the LCDbacklight assembly, LCD display, or touchscreen.
[* icon_caution] Don't insert the opening pick any deeper than the black bezel on2 mm into the side of the display. Inserting the pick too far maydeeper than 2 mm could damage the LCDbacklight assembly, LCD display, or touchscreen.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります